Problem sa konekcijom izmedju televizora i računara
- Začetnik teme amerigovespuci
- Datum pokretanja
- Učlanjen(a)
- 20.09.2014
- Poruka
- 1.861
Izgleda da je taj Smart TV globalni problem, cas radi, cas ne.
Postoji vise resenja koja su se pokazala manje, vise uspesna recimo
promena DNS ili direktni apdejt iz menija, na engleskom...
___________________________
(promena DNS adrese iz menija)
try changing in Network Settings your DNS server to 8.8.8.8.
Thank u so much. It worked immediately..
------------------------------------------------
Menu >Network> Network Status >IP Settings >DNS Mode to Manual >
151.80.14.237
___________________________
(ruter na drugi kanal, zbog interferencije sa komsijom)
I changed my router to channel 10 which had little interference and it finally fix my
problem.
I tried your solution and it worked . I can now use the smart hub. Thanks
___________________________
(reset sa zadnje strane, ko kod biosa)
- Unplug the TV from the outlet
- If you have the small cursor button on back of the TV,
press it once, and then again. This time hold it in for about 10 seconds
- Leave it unplugged for at least 10 mins and then plug it all back in.
Give it a few mins to do it's thing and that should fix the app issues! (well at least it
did for me)
___________________________
(initial setup)
What fixed the problem was to go into System and select the Setup option
and go through the entire 10 or so steps of setting up your TV almost like the
initial setup screen.
Note all settings and apps are retained as it is not a factory reset.
May not apply to all network issues but it fixed the Samsung App
(not connected to network) while everything else with network worked.
___________________________
(Ili na flesku skines zadnji apdejt, pa flesku u televizor i startujes to iz menija)
Connect USB to your TV
Select source = TV
Click Menu on remote >> support >> Software Update (select option from USB) >>
click next
It will automatically detect that file from USB and updates the software.
TV restarts automatically and you all set. !!!
___________________________
(Takodje moze sa daljinskog da nadjes opciju)
MENU button on my remote. Then went to SUPPORT.
Then hit SOFTWARE UPDATE, then ONLINE. And then wait til it updates. Voila.
Postoji vise resenja koja su se pokazala manje, vise uspesna recimo
promena DNS ili direktni apdejt iz menija, na engleskom...
___________________________
(promena DNS adrese iz menija)
try changing in Network Settings your DNS server to 8.8.8.8.
Thank u so much. It worked immediately..
------------------------------------------------
Menu >Network> Network Status >IP Settings >DNS Mode to Manual >
151.80.14.237
___________________________
(ruter na drugi kanal, zbog interferencije sa komsijom)
I changed my router to channel 10 which had little interference and it finally fix my
problem.
I tried your solution and it worked . I can now use the smart hub. Thanks
___________________________
(reset sa zadnje strane, ko kod biosa)
- Unplug the TV from the outlet
- If you have the small cursor button on back of the TV,
press it once, and then again. This time hold it in for about 10 seconds
- Leave it unplugged for at least 10 mins and then plug it all back in.
Give it a few mins to do it's thing and that should fix the app issues! (well at least it
did for me)
___________________________
(initial setup)
What fixed the problem was to go into System and select the Setup option
and go through the entire 10 or so steps of setting up your TV almost like the
initial setup screen.
Note all settings and apps are retained as it is not a factory reset.
May not apply to all network issues but it fixed the Samsung App
(not connected to network) while everything else with network worked.
___________________________
(Ili na flesku skines zadnji apdejt, pa flesku u televizor i startujes to iz menija)
Connect USB to your TV
Select source = TV
Click Menu on remote >> support >> Software Update (select option from USB) >>
click next
It will automatically detect that file from USB and updates the software.
TV restarts automatically and you all set. !!!
___________________________
(Takodje moze sa daljinskog da nadjes opciju)
MENU button on my remote. Then went to SUPPORT.
Then hit SOFTWARE UPDATE, then ONLINE. And then wait til it updates. Voila.
Član
- Učlanjen(a)
- 08.04.2011
- Poruka
- 257
E ovako prošlo je dosta vremena od kada sam otvorio ovu temu do tada uspjeo sam da konektujem TV sa desktop računarom i televizor sam nekoliko puta ažurirao sada je na verziji 270 a na računaru sam instalirao Windows 10 proIzgleda da je taj Smart TV globalni problem, cas radi, cas ne.
Postoji vise resenja koja su se pokazala manje, vise uspesna recimo
promena DNS ili direktni apdejt iz menija, na engleskom...
___________________________
(promena DNS adrese iz menija)
try changing in Network Settings your DNS server to 8.8.8.8.
Thank u so much. It worked immediately..
------------------------------------------------
Menu >Network> Network Status >IP Settings >DNS Mode to Manual >
151.80.14.237
___________________________
(ruter na drugi kanal, zbog interferencije sa komsijom)
I changed my router to channel 10 which had little interference and it finally fix my
problem.
I tried your solution and it worked . I can now use the smart hub. Thanks
___________________________
(reset sa zadnje strane, ko kod biosa)
- Unplug the TV from the outlet
- If you have the small cursor button on back of the TV,
press it once, and then again. This time hold it in for about 10 seconds
- Leave it unplugged for at least 10 mins and then plug it all back in.
Give it a few mins to do it's thing and that should fix the app issues! (well at least it
did for me)
___________________________
(initial setup)
What fixed the problem was to go into System and select the Setup option
and go through the entire 10 or so steps of setting up your TV almost like the
initial setup screen.
Note all settings and apps are retained as it is not a factory reset.
May not apply to all network issues but it fixed the Samsung App
(not connected to network) while everything else with network worked.
___________________________
(Ili na flesku skines zadnji apdejt, pa flesku u televizor i startujes to iz menija)
Connect USB to your TV
Select source = TV
Click Menu on remote >> support >> Software Update (select option from USB) >>
click next
It will automatically detect that file from USB and updates the software.
TV restarts automatically and you all set. !!!
___________________________
(Takodje moze sa daljinskog da nadjes opciju)
MENU button on my remote. Then went to SUPPORT.
Then hit SOFTWARE UPDATE, then ONLINE. And then wait til it updates. Voila.
Evo šta mi se sada desilo:
Ovo Multimedia mi radi znači šta kod stavim tu video snimak neku sliku pusti mi na tv
Remote Control-isto radi mogu da prebacujem kanale sve živo kontrolišem sve samo i dalje sliku neće da mi pusti na računar pojavi se ovo (Unable to show TV because TV status gas changed.) a ništa nisam mjenjao kako to da riješim zna li ko?
I ovo zna da mi se pojavi:
- Učlanjen(a)
- 20.09.2014
- Poruka
- 1.861
Pa dobro sad, s obzirom da to sve sa win 10 jos nije ljudski razradjeno i ispitano, a kako i sam televizor predlaze ovde, treba otvoris ovo ovde sto pise, Remote Control i da pronadjes kompaktibilni mod za tvoj TV. Znaci procackaj po meniju pa vidi koje sve modove ima(izvor), a moz i da napises ovde koje su dostupne opcije, da ako je neko doziveo ista slicno, da baci pogled. Probaj sve kombinacije, glup savet, al ajd.
Član
- Učlanjen(a)
- 08.04.2011
- Poruka
- 257
Remote Control(daljinski upravljač)
kaže mi da na njemu nadjem source i našao sam kada to kliknem otvori mi se ovo:
Kada je na modu TV onda mi piše ono gore kao sa slike,dalje ovo što piše Spoljni to kada kliknem ništa se ne dešava samo izgubi signal,ovo Screen Mirroring to je ako hoću da imam sliku telefona na televizoru najzanimljivije mi je bilo ovo što piše
Multimed. Desktop-N6.. e kada kliknem na to otvori mi se ovo:
ne znam šta više da mu radim...
Član
- Učlanjen(a)
- 04.08.2009
- Poruka
- 35
skini program Mezzmo i on ima mogucnost povezivanja smart tv sa racunarom pravi novu DLNA mrezu ,i ima podrsku za subtitle evo linka:
Kod:
http://www.conceiva.com/products/mezzmo/mezzmo_windows.aspČlan
- Učlanjen(a)
- 08.04.2011
- Poruka
- 257
Proradilo je konačno ako se kome javi sličan problem treba samo da bude strpljiv da stalno ažurira TV i da normalno provjeri konekciju izmedju televizora i kompjutera
Posle nekih 4-5 ažuriranja je proradilo
Posle nekih 4-5 ažuriranja je proradilo
- Učlanjen(a)
- 20.09.2014
- Poruka
- 1.861
A, jel se secas kad ti rekoh da televizor mora da bude ukljucen u struju, a ti kazes Bazlik prijatelju, to je pametan televizor, ukljucice se on sam...
Odlicno obavljen poso, ja bih jos samo sa daljinskog blokirao autoapdejt, da se ne desi neki nepredvidjeni dens.