This guide uses the router Linksys WRT54GL. If you have a better router, skip the part of the guide, which describes the CPU overclock!
First, a little introduction. We will not claim the credit for this guide - guide is published on the T-2 an informal forum and written by the Seeker . Guide I added imagery that is more user-friendly and easy. In order to operate the TV on your PC, you must be a subscriber of T-2 TV via VDSL 2 or optics. Operate only subscribed channels. In this guide we Linksys WRT54GL router trained to be decent over it (without collisions) to monitor TV on PC via WiFi's. For this purpose, we use udpxy, which will be converted to IPTV multicast unicast. Everything we do, do it at your own risk!
Some Tomato fashion contain udpxy ( Tomato by Shibby , Toastman Firmware , AdvancedTomato , which perhaps). If you have a router installed in such a fw, follow these steps . If you are unsure whether your fw-ROM is already available udpxy, click on the Firewall settings and see if you have additional options for Multicast (IGMPproxy) and udpxy (last picture in this guide). If udpxy not firewall settings, continue reading this guide.
So we need a router with Tomato installed FW . Log in to the router and select Options Advanced;
Select the Firewall option and If checked the box Allow multicast;
Store;
* If you are using Tomato by Shibby or beta version of Tomato RAF FW Firewall settings you see at the very end of this guide.
Choose an Option Administration, JFFS2;
If checked Enable, and then press the Format / Erase ...;
Confirmed;
Wait;
Select field Scripts;
Under field Init enter the command and save:
sleep 10
/ jffs / udpxy-p 1234
Under field Firewall enter the command and save:
iptables-A INPUT-p udp-m udp-d 224.0.0.0 / 4-j ACCEPT
Reštartamo router;
Now we need a program PuTTY , which we reported on the router (Telnet protocol, IP 192.168.1.1);
Enter the name uporabnišlo (each entry is confirmed by pressing the Enter key);
Password;
We declared;
You enter some commands - first go to the directory / jffs;
cd / jffs
On your router will download a file udpxy (you can use a file from my server):
wget http://www.oyoy.si/udpxy
Allow the program to run:
chmod 770 udpxy
Restart the router:
reboot
Allow the router re-set.
Router and your hair will be a little bit. overclockali processor. With PuTTY-eat log in to the router and enter the command to the processor clock speed is raised to 250 MHz:
nvram set clkfreq = 250
Confirmation of the above command for all eternity xD:
nvram commit
Re reštartamo router:
reboot
When the router re-set, just log into it - if you are using Tomato RAF can immediately notice that the new processor frequency of 250 MHz;
You can also check the operation of udpxy at http://192.168.1.1:1234/status/;
If everything is as defined above, are almost won. We need VLC Player and customized playlist that looks like this;
# EXTM3U
# EXTINF: 0, POP TV
http://192.168.1.1:1234/udp/239.1.1.9:5000 # EXTINF: 0, Channel A http://192.168.1.1:1234/udp/239.1.1.8:5000
Playlist get here , for possible editing, open it with a text editor and customize. Playlist restart the VLC-ROM and enjoy;
As noted above, we are in a specific guide adapted to the router Linksys WRT54GL, which is not exactly the pinnacle of today's technology. The same procedure without overclockanja processor I used to Linksys E2000 router and the results are excellent. Television operates without the slightest jams, WiFi signal strength is better, in short, better than the router, the better the results.
If your TV is still cube, change the channel in which it operates WiFi. Click the Basic Network and Channel box, select another channel (the default is channel 6 and if you live in a block where all the neighbors wifi on channel 6, is a very likely cause dysfunction wireless). Change course to save;
* Firewall Settings for Tomato by Shibby or Tomato RAF beta FW;
** In the UDP proxy may be in a manner as described above, the link is not more than 3-clients. If you need more access, it is necessary to change the command in the Init field;
sleep 10
/ jffs / udpxy-p 1234-c 10
The number 10 represents the max number of clients that can connect to udpxy - you can change it if desired or. necessary, supposedly the maximum 50
(For information, the user would like to thank T-2 informal forum madpanter -ROM)
*** Udpxy it is possible to open the "outside" and to its IPTV can be accessed even when we are not home. Read more here . I refer to the possibility of abuse and udpxy open outwards at your own risk!
