Steve Bowler - Bowler CBT Labs Juniper Series 1
English | Video 1020x768 | Elearning | 1.37 GB
[/Firewall Filter Lab 1]
Total Runtime: 46 Minutes
*How to create a basic firewall filter
*How to use a term within a firewall filter
*Use proper show commands and test connectivity to verify proper firewall filter
implementation
*Explain the basics of firewall filters and why they are used
[/Firewall Filter Lab]
Total Runtime: 35 Minutes
*How to count and log traffic on an interface
*Use proper show commands and testing to verify that the firewall filter counters and
logging is being implemented correctly
[/Introduction to Juniper Lab 1]
Total Runtime: 53 Minutes
*JUNOS Basics
*How to navigate the different CLI Modes
*Candidate vs. active configuration
*Show how to use the commit command
*Show how to use the rollback command
*System hostname and system time
[/Introduction to Juniper Lab 2]
Total Runtime: 42 Minutes
*Basic configuration of physical and loopback interfaces
*Difference between deactivating and disabling an interface
*Explain the concept of a unit and family
*Add a description to an interface
*Add an IPv4 and an IPv6 address to an interface
*Perform show commands for verification
[/Introduction to Juniper Lab 3]
Total Runtime: 32 Minutes
*Configure a point to point link between a Cisco and Juniper router
*Show how to use the ping command and some of its options
*Show how to use the monitor command and some of its options
[/Introduction to Juniper Lab 4]
Total Runtime: 37 Minutes
*Commonly used show commands (Comparing Juniper to Cisco)
[/Introduction to Juniper Series 1]
Total Runtime: 8 Minutes
*Welcome to Juniper Series 1!
*The order in which to view the videos
*Talk about the Juniper Networks Certification Program (JNCP)
*Junipers growing presence in the networking industry
[/Introduction to J-Web]
Total Runtime: 33 Minutes
*How to manage and maintain your Juniper device via J-Web
*How to access your Juniper device via J-Web
*Perform basic routing protocol administration
*Perform basic monitoring of interfaces
*How to navigate the J-Web
[/Juniper Border Gateway Protocol (BGP) Lab 1]
Total Runtime: 46 Minutes
*The basic principles of EBGP and why you would use EBGP
*External BGP (EBGP)
*Use show commands to verify proper EBGP operation
*Advertise networks into EBGP
[/Juniper Border Gateway Protocol (BGP) Lab 2]
Total Runtime: 46 Minutes
*The basic principles of IBGP and why you would use IBGP
*Internal BGP (IBGP)
*Use show commands to verify proper IBGP operation
*BGP Authentication
*IBGP best practices
[/Juniper Default Routing Lab 1]
Total Runtime: 27 Minutes
*How to create default routes
*Use show commands to verify proper default routing operation
*Explain why and in what situations you would use default routing
[/Juniper Logical Systems Lab 1]
Total Runtime: 27 Minutes
*What is a logical system and why use them
*How to use the LT interface option when connecting logical systems
[/Juniper Logical Systems Lab 2]
Total Runtime: 25 Minutes
*How to use the EM interface option when connecting logical systems
[/Juniper Open Shortest Path First (OSPF) Lab 1]
Total Runtime: 30 Minutes
*Single area OSPF
*Basic principles of the OSPF Routing protocol
*DR/BDR election process
*Use show command to verify proper single area OSPF operation
*How to advertise networks into OSPF
[/Juniper Open Shortest Path First (OSPF) Lab 2]
Total Runtime: 26 Minutes
*Multiple area OSPF
*Area Border Router (ABR) Operation
*Use show commands to verify proper multi area OSPF operation
*How to advertise networks into OSPF
[/Juniper Routing Information Protocol (RIPv2) Lab 1]
Total Runtime: 58 Minutes
*The basic principles RIPv2
*How to manipulate the RIP metric for proper traffic flow
*Use show commands to verify proper RIPv2 operation
*How to advertise networks into RIPv2
[/Juniper Routing Policy Lab 1]
Total Runtime: 52 Minutes
*How to setup a basic Routing Policy
*What a term is and what it is used for
*Match conditions
*Action conditions
*Similarities between Juniper Routing Policies and Cisco Route Maps
*Import and Export Policies
[/Juniper Static Routing Lab]
Total Runtime: 37 Minutes
*How to create static routes
*Use show commands to verify proper static routing operation
*Explain the routing table and route preference
[/JUNOS Configuration Basics Lab 1]
Total Runtime: 27
*Basic user access and banner configuration
*How to create and manage user accounts
*How to create the message and announcement banners
[/Traceoptions Lab 1]
Total Runtime: 25 Minutes
*Basic traceoption functions
*How traceoptions are similar to Cisco debugs
*How to create traceoption files and flags and view the output of traceoption files
With a Premium account you can download files having Fullspeed !
Download from Uploaded
Kod:
http://uploaded.net/file/qpxolyim/Bowler.CBT.Labs.Juniper.Series.1.part1.rar
http://uploaded.net/file/bwpzw5ar/Bowler.CBT.Labs.Juniper.Series.1.part2.rar
http://uploaded.net/file/nvj95ud7/Bowler.CBT.Labs.Juniper.Series.1.part3.rar
http://uploaded.net/file/6h83rlsp/Bowler.CBT.Labs.Juniper.Series.1.part4.rar
Kod:
http://lumfile.com/9iu31xgxk0j9/Bowler.CBT.Labs.Juniper.Series.1.part1.rar
http://lumfile.com/gk7z6dwto0bg/Bowler.CBT.Labs.Juniper.Series.1.part2.rar
http://lumfile.com/u59jmjsh1sy4/Bowler.CBT.Labs.Juniper.Series.1.part3.rar
http://lumfile.com/3odiedncyoov/Bowler.CBT.Labs.Juniper.Series.1.part4.rar