Šta je novo?

Siemens Gigaset SX763 + JDownloader + CLR Script

Član
Učlanjen(a)
19.11.2009
Poruka
17
Evo da započnem novu temu sa odgovorom na pitanje kako glasi CLR skripta za Siemens Gigaset SX763 WLAN dsl router, koja omogućuje rekonekciju pod JDownloader-om. Odgovor je - ovisi u kojoj zemlji živite, pa čak i kojeg Internet providera imate.

Ja ću ovdje navesti dva providera u Hrvatskoj - prvi je T-COM, a drugi je ISKON.

Dakle za T-COM Siemens Gigaset SX763 router slijedite upute:

1.-odaberite u settings-u>Reconnection>u tab-u CLR Script

2.-stisnite tipku "Fetch Router IP"

3.-polja "Login" i "Password" ostavite prazna

4.-kopirajte dolje navedenu skriptu (tekst) i zalijepite u veliko polje namijenjeno za skriptu:



Kod:
<CryptLoad>
<Router name="Siemens SX 763 T-COM HR" />
<Command method="GET" action="UE/welcome_login.html" />
<Command method="GET" action="UE/help/en/help_welcome_login.html" />
<Command method="POST" action="UE/ProcessForm">
<Parameter name="form_submission_type" value="login" />
<Parameter name="form_submission_parameter" value="" />
<Parameter name="current_page" value="welcome_login.html" />
<Parameter name="next_page" value="home_security.html" />
<Parameter name="i" value="2" />
<Parameter name="admin_role_name" value="administrator" />
<Parameter name="operator_role_name" value="operator" />
<Parameter name="subscriber_role_name" value="subscriber" />
<Parameter name="choose_role" value="0" />
<Parameter name="your_password" value="user" />
<Parameter name="Login" value="OK" />
</Command>
<Command method="GET" action="UE/home_security.html" />
<Command method="GET" action="UE/home.html" />
<Command method="GET" action="UE/%5C%22/FS/images/siemens.gif%5C%22" />
<Command method="GET" action="UE/%5C%22/FS/images/telkom_logo.gif%5C%22" />
<Command method="GET" action="UE/home_internet.html">
<Parameter name="counter" value="0" />
</Command>
<Command method="POST" action="UE/ProcessForm">
<Parameter name="form_submission_type" value="ok_submit" />
<Parameter name="form_submission_parameter" value="" />
<Parameter name="current_page" value="home.html" />
<Parameter name="next_page" value="home.html" />
<Parameter name="l" value="2" />
<Parameter name="0_set_IGD.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.1.V_ActionConnect" value="1" />
</Command>
<Command method="GET" action="UE/home.html" />
<Command method="GET" action="UE/%5C%22/FS/images/siemens.gif%5C%22" />
<Command method="GET" action="UE/%5C%22/FS/images/telkom_logo.gif%5C%22" />
<Command method="GET" action="UE/home_internet.html">
<Parameter name="counter" value="0" />
</Command>
<Command method="POST" action="UE/ProcessForm">
<Parameter name="form_submission_type" value="ok_submit" />
<Parameter name="form_submission_parameter" value="" />
<Parameter name="current_page" value="home.html" />
<Parameter name="next_page" value="home.html" />
<Parameter name="l" value="2" />
<Parameter name="0_set_IGD.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.1.V_ActionConnect" value="1" />
</Command>
<Command method="GET" action="UE/home.html" />
<Command method="GET" action="UE/home_internet.html">
<Parameter name="counter" value="0" />
</Command>
<Command method="GET" action="UE/logout.html" />
<Command method="GET" action="UE/welcome_login.html" />
<Command method="GET" action="UE/help/en/help_welcome_login.html" />
</CryptLoad>
5. Obratite pažnju da je u 15-om redu naveden defaultni password za T-COM router, a to je user:

Kod:
<Parameter name="your_password" value="user" />
Ako imate neki drugi password onda postavite njega.

6.-zadnji korak je provjera dali sve funkcionira- ispod polja gdje ste kopirali tekst skripte postoji tipka "Change IP" -stisnite "Change IP" i kad vam bude izvršio reconnect-ing trebao bi se pokazati smajlić sa desne strane.


Ako to ne radi onda probajte ovu CLR skriptu dobivenu pod Firefoxom pomoću Live HTTP header plug-in-a.
Sva pravila vrijede kao i za prethodnu skriptu samo što je defaultni password za T-COM upisan u 12-tom redu:

Kod:
<Parameter name="your_password" value="user" />
Promijenite u ovom redu password, ako password nije user već neki drugi.


Skripta je slijedeća:

Kod:
<CryptLoad>
<Router name="Siemens SX 763 T-COM HR" />
<Command method="GET" action="" />
<Command method="GET" action="UE/welcome_login.html" />
<Command method="GET" action="UE/help/en/help_welcome_login.html" />
<Command method="POST" action="UE/ProcessForm">
<Parameter name="form_submission_type" value="login" />
<Parameter name="form_submission_parameter" value="" />
<Parameter name="current_page" value="welcome_login.html" />
<Parameter name="next_page" value="home_security.html" />
<Parameter name="i" value="2" />
<Parameter name="your_password" value="user" />
<Parameter name="Login" value="OK" />
</Command>
<Command method="GET" action="UE/home_security.html" />
<Command method="GET" action="UE/home.html" />
<Command method="GET" action="UE/home_internet.html">
<Parameter name="counter" value="0" />
</Command>
<Command method="GET" action="UE/home_internet.html">
<Parameter name="counter" value="1" />
</Command>
<Command method="POST" action="UE/ProcessForm">
<Parameter name="form_submission_type" value="ok_submit" />
<Parameter name="form_submission_parameter" value="" />
<Parameter name="current_page" value="home.html" />
<Parameter name="next_page" value="home.html" />
<Parameter name="l" value="2" />
<Parameter name="0_set_IGD.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.1.V_ActionConnect" value="1" />
</Command>
<Command method="GET" action="UE/home.html" />
<Command method="GET" action="UE/home_internet.html">
<Parameter name="counter" value="0" />
</Command>
<Command method="GET" action="UE/home_internet.html">
<Parameter name="counter" value="1" />
</Command>
<Command method="POST" action="UE/ProcessForm">
<Parameter name="form_submission_type" value="ok_submit" />
<Parameter name="form_submission_parameter" value="" />
<Parameter name="current_page" value="home.html" />
<Parameter name="next_page" value="home.html" />
<Parameter name="l" value="2" />
<Parameter name="0_set_IGD.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.1.V_ActionConnect" value="1" />
</Command>
<Command method="GET" action="UE/home.html" />
<Command method="GET" action="UE/home_internet.html">
<Parameter name="counter" value="0" />
</Command>
<Command method="GET" action="UE/home_internet.html">
<Parameter name="counter" value="1" />
</Command>
<Command method="GET" action="UE/logout.html" />
<Command method="GET" action="UE/welcome_login.html" />
<Command method="GET" action="UE/help/en/help_welcome_login.html" />
<Command method="POST" action="safebrowsing/downloads">
<Parameter name="client" value="navclient-auto-ffox" />
<Parameter name="appver" value="3.6.15" />
<Parameter name="pver" value="2.2" />
<Parameter name="wrkey" value="AKEgNivzVDqbSO-ERKLZegRrxUtZmB98LBuXeIpSRWGxw7UzJQ6e2E_caVR5NGMSlDtWw_ABIvbejsCqm3fIhcjsIrCQGYCcgQ" />
</Command>
<Command method="GET" action="safebrowsing/rd/ChNnb29nLW1hbHdhcmUtc2hhdmFyEAEYpOkCIKTpAjIFpLQAAAE" />
<Command method="GET" action="safebrowsing/rd/ChNnb29nLW1hbHdhcmUtc2hhdmFyEAAYtYYCILaGAioFNoMAAAEyBTWDAAAB" />
<Command method="GET" action="safebrowsing/rd/ChFnb29nLXBoaXNoLXNoYXZhchABGLOSBCC8kgQqBjQJAQD_ATIFMwkBAAE" />
<Command method="GET" action="safebrowsing/rd/ChFnb29nLXBoaXNoLXNoYXZhchAAGNuKCCDciggyBVsFAgAD" />
<Command method="GET" action="safebrowsing/rd/ChFnb29nLXBoaXNoLXNoYXZhchAAGN2KCCDeiggqBV4FAgABMgVdBQIAAQ" />
</CryptLoad>
Ako želite standardnu LiveHeader/Curl skriptu za ovaj T-COM router onda slijedite upute.

Ovo isto tako vrijedi samo za T-COM-ove routere.


1.-odaberite u Settings-u>Reconnection>LiveHeader/Curl

2.-stisnite tipku "Fetch Router IP"

3.-polja "Login" i "Password" ostavite prazna

4.-kopirajte dolje navedenu skriptu (tekst) i zalijepite u veliko polje
namijenjeno za skriptu:


Kod:
[[[HSRC]]]
[[[STEP]]]
[[[REQUEST]]]
POST /UE/ProcessForm HTTP/1.1
Host: %%%routerip%%%

form_submission_type=login&form_submission_parameter=&current_page=welcome_login.html&next_page=home.html&i=1&admin_role_name=administrator&operator_role_name=operator&subscriber_role_name=subscriber&choose_role=0&your_password=EUFORIJA&Login=OK
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET /UE/home.html? HTTP/1.1
Host: %%%routerip%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET /UE/home_internet.html?counter=0 HTTP/1.1
Host: %%%routerip%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
POST /UE/ProcessForm HTTP/1.1
Host: %%%routerip%%%

form_submission_type=ok_submit&form_submission_parameter=&current_page=home.html&next_page=home.html&0_set_IGD.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.1.V_ActionConnect=1
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET /UE/home.html? HTTP/1.1
Host: %%%routerip%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET /UE/home_internet.html?counter=0 HTTP/1.1
Host: %%%routerip%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
POST /UE/ProcessForm HTTP/1.1
Host: %%%routerip%%%

form_submission_type=ok_submit&form_submission_parameter=&current_page=home.html&next_page=home.html&0_set_IGD.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.1.V_ActionConnect=1
[[[/REQUEST]]]
[[[/STEP]]]
[[[STEP]]]
[[[REQUEST]]]
GET /UE/home.html? HTTP/1.1
Host: %%%routerip%%%
[[[/REQUEST]]]
[[[/STEP]]]
[[[STEP]]]
[[[REQUEST]]]
GET /UE/home_internet.html?counter=0 HTTP/1.1
Host: %%%routerip%%%
[[[/REQUEST]]]
[[[/STEP]]]
[[[/HSRC]]]
Opet obratite pažnju na dio skripte gdje trebate ukucati baš vaš vlastiti password za router koji za T-COM routere glasi user.

Prema tome u redu gdje stoji:

Kod:
your_password=EUFORIJA
Promijenite u:

Kod:
your_password=user
Ili ako imate svoj vlastiti password onda postavite njega.


I to bi bilo sve što se tiče skripti za Siemens Gigaset SX763 router koji dobivate od T-COM-a.



Priča je nešto drugačija za Siemens Gigaset SX763 router koji dobijete od ISKON-a.
Dakle za ISKONOV Siemens Gigaset SX763 router slijedite upute:

1.-odaberite u Setinngs-u>Reconnection>u tab-u CLR Script

2.-stisnite tipku "Fetch Router IP" ( za ISKON je to 192.168.5.1, a defaultni password je admin )

3.-polja "Login" i "Password" ostavite prazna

4.-kopirajte dolje navedenu skriptu (tekst) i zalijepite u veliko polje namijenjeno za skriptu.

Najprije ću Copy/Paste kraću skriptu koja u 9-om redu koda <Parameter name="your_password" value="admin" /> ima za password admin.

Ako je vaš password drugačiji onda recimo za password fengshui stavite u 9-om retku slijedeće:


Kod:
<Parameter name="your_password" value="fengshui" />
Skripta broj jedan ili kraća skripta glasi:


Kod:
<CryptLoad>
<Router name="Siemens Gigaset SX 763 WLAN dsl" />
<Command method="POST" action="UE/ProcessForm">
<Parameter name="form_submission_type" value="login" />
<Parameter name="form_submission_parameter" value="" />
<Parameter name="current_page" value="welcome_login.html" />
<Parameter name="next_page" value="home_security.html" />
<Parameter name="i" value="1" />
<Parameter name="your_password" value="admin" />
<Parameter name="Login" value="OK" />
</Command>
<Command method="GET" action="UE/home.html" />
<Command method="GET" action="UE/home_internet.html">
<Parameter name="counter" value="0" />
</Command>
<Command method="POST" action="UE/ProcessForm">
<Parameter name="form_submission_type" value="ok_submit" />
<Parameter name="form_submission_parameter" value="" />
<Parameter name="current_page" value="home.html" />
<Parameter name="next_page" value="home.html" />
<Parameter name="l" value="1" />
<Parameter name="0_set_IGD.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.1.V_ActionConnect" value="1" />
</Command>
<Command method="GET" action="UE/home_internet.html">
<Parameter name="counter" value="1" />
</Command>
</CryptLoad>
Alternativna skripta ili skripta broj dva koja je duža glasi:


Kod:
<CryptLoad>
<Router name="Siemens Gigaset SX 763 WLAN dsl" />
<Command method="GET" action="mail/">
<Parameter name="ui" value="2" />
<Parameter name="ik" value="209bf2cff5" />
<Parameter name="view" value="cm" />
<Parameter name="fs" value="1" />
<Parameter name="tf" value="1" />
<Parameter name="ver" value="AyGUVRSkGyQ.en_GB." />
<Parameter name="am" value="!CktJiebtwxVvDX0jUxY37nSDEdg_rblpEsYIDXxdyA1o7PMWeLlkdCDT6Q" />
</Command>
<Command method="POST" action="UE/ProcessForm">
<Parameter name="form_submission_type" value="login" />
<Parameter name="form_submission_parameter" value="" />
<Parameter name="current_page" value="welcome_login.html" />
<Parameter name="next_page" value="home_security.html" />
<Parameter name="i" value="1" />
<Parameter name="your_password" value="admin" />
<Parameter name="Login" value="OK" />
</Command>
<Command method="GET" action="UE/home_security.html" />
<Command method="POST" action="mail/channel/bind">
<Parameter name="VER" value="8" />
<Parameter name="at" value="AF6bupObcnswGX2ijrHPeNMLQdciaUglIQ" />
<Parameter name="it" value="20366" />
<Parameter name="SID" value="CC8AAF4CF4714514" />
<Parameter name="RID" value="31870" />
<Parameter name="AID" value="19" />
<Parameter name="zx" value="qmz980ixw7ws" />
<Parameter name="t" value="1" />
</Command>
<Command method="GET" action="mail/">
<Parameter name="ui" value="2" />
<Parameter name="ik" value="209bf2cff5" />
<Parameter name="view" value="cw" />
<Parameter name="fs" value="1" />
<Parameter name="tf" value="1" />
<Parameter name="ver" value="AyGUVRSkGyQ.en_GB." />
<Parameter name="am" value="!CktJiebtwxVvDX0jUxY37nSDEdg_rblpEsYIDXxdyA1o7PMWeLlkdCDT6Q" />
</Command>
<Command method="GET" action="UE/home.html" />
<Command method="GET" action="UE/home_internet.html">
<Parameter name="counter" value="0" />
</Command>
<Command method="POST" action="UE/ProcessForm">
<Parameter name="form_submission_type" value="ok_submit" />
<Parameter name="form_submission_parameter" value="" />
<Parameter name="current_page" value="home.html" />
<Parameter name="next_page" value="home.html" />
<Parameter name="l" value="1" />
<Parameter name="0_set_IGD.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.1.V_ActionConnect" value="1" />
</Command>
<Command method="GET" action="UE/home.html" />
<Command method="GET" action="UE/home_internet.html">
<Parameter name="counter" value="0" />
</Command>
<Command method="GET" action="UE/home_internet.html">
<Parameter name="counter" value="1" />
</Command>
<Command method="GET" action="UE/home_internet.html">
<Parameter name="counter" value="2" />
</Command>
<Command method="GET" action="UE/home_internet.html">
<Parameter name="counter" value="3" />
</Command>
</CryptLoad>
Ovdje se password admin nalazi u 18-om redu, pa ga promijenite, ako imate neki drugi password.



Ako želite standardnu LiveHeader/Curl skriptu za ovaj ISKONOV router onda slijedite upute.


1.-odaberite u Settings-u>Reconnection>LiveHeader/Curl

2.-stisnite tipku "Fetch Router IP"

3.-polja "Login" i "Password" ostavite prazna

4.-kopirajte dolje navedenu skriptu (tekst) i zalijepite u veliko polje
namijenjeno za skriptu:


Kod:
[[[HSRC]]]
[[[STEP]]]
[[[REQUEST]]]
POST /UE/ProcessForm HTTP/1.1
Host: %%%routerip%%%

form_submission_type=login&current_page=welcome_login.html&next_page=home_security.html&i=1&your_password=admin&Login=OK [[[/REQUEST]]]
[[[/STEP]]]
[[[STEP]]]
[[[REQUEST]]]
GET /UE/home_security.html? HTTP/1.1
Host: %%%routerip%%%
[[[/REQUEST]]]
[[[/STEP]]]
[[[STEP]]]
[[[REQUEST]]]
GET /UE/home_internet.html?counter=0 HTTP/1.1
Host: %%%routerip%%%
[[[/REQUEST]]]
[[[/STEP]]]
[[[STEP]]]
[[[REQUEST]]]
POST /UE/ProcessForm HTTP/1.1
Host: %%%routerip%%%

form_submission_type=ok_submit&current_page=home.html&next_page=home.html&0_set_IGD.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.1.V_ActionConnect=1
[[[/REQUEST]]]
[[[/STEP]]]
[[[/HSRC]]]
I to je to. Skripta radi za ISKONOV router Siemens Gigaset SX763 WLAN dsl.


Jedna napomena. Ove skripte rade 100%. Međutim, kada se skripte napišu ili Copy/Paste na raznim forumima, događa se nerijetko da u postu pojedine naredbe za router su tako napisane da nastaju razmaci (praznine) između pojedinih slova u cijeloj skripti. To naravno znači da router neće razumjeti naredbu koju mu šalje JDownloader.

Ako bude nekih problema onda ću napisati sve skripte u jedan TXT dokument koji ću onda linkati ovdje.

pozz

Mahavir
 
Poslednja izmena:
Član
Učlanjen(a)
26.06.2010
Poruka
28
Sve je to lijepo samo što meni treba skripta provajder HT Mostar. Napravio sam je po Bokijevim uputstvima u Cryptload-u ali mi se nesto pojebalo pa sad nemogu nikako da rekonektujem router. Pravio sam ponovo ali ne ide...
I dalje pokušavam...
 
Član
Učlanjen(a)
21.06.2011
Poruka
1
care legendo šampione kralju!!! SVAKA ČAST.
skripta radi SAVRŠENO! živio i hvala puno !
 
Top