- Učlanjen(a)
- 08.01.2010
- Poruka
- 131
New model Raspberry Pi - The Pi 2 Model B launched
Ваши тестови,запажаљња,ваше импресије и ваша нова играчка за све врсте СДиХД медије......
Broadcom BCM2836 900MHz ARM Cortex-A7 quad-core processor with VideoCore IV dual-core GPU
GPU provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode
GPU is capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure
1GB LPDDR2 SDRAM
HD 1080p video output
Composite video (PAL/NTSC) output
Stereo audio output
10/100 BaseT RJ45 Ethernet socket
HDMI 1.3 & 1.4 video/audio socket
3.5mm 4-pole audio/composite video out jack socket
4 x USB 2.0 sockets
15-way MPI CSI-2 connector for Raspberry Pi HD video camera (775-7731)
15-way Display Serial Interface connector
MicroSD card socket
Boots from MicroSD card, running a version of the Linux operating system (See Note below)
40-pin header for GPIO and serial buses (compatible with Raspberry Pi Model B 26-pin header)
Header footprint for JTAG connector
Power supply: +5V @ 2A via microUSB socket
Dimensions: 86 x 56 x 20mm
Ваши тестови,запажаљња,ваше импресије и ваша нова играчка за све врсте СДиХД медије......
Broadcom BCM2836 900MHz ARM Cortex-A7 quad-core processor with VideoCore IV dual-core GPU
GPU provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode
GPU is capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure
1GB LPDDR2 SDRAM
HD 1080p video output
Composite video (PAL/NTSC) output
Stereo audio output
10/100 BaseT RJ45 Ethernet socket
HDMI 1.3 & 1.4 video/audio socket
3.5mm 4-pole audio/composite video out jack socket
4 x USB 2.0 sockets
15-way MPI CSI-2 connector for Raspberry Pi HD video camera (775-7731)
15-way Display Serial Interface connector
MicroSD card socket
Boots from MicroSD card, running a version of the Linux operating system (See Note below)
40-pin header for GPIO and serial buses (compatible with Raspberry Pi Model B 26-pin header)
Header footprint for JTAG connector
Power supply: +5V @ 2A via microUSB socket
Dimensions: 86 x 56 x 20mm
Poslednja izmena: